Oce North America TDS600 - Manual (Page 295)

The folder 295
Off line folding
An important productivity feature provided by the Océ TDS600 folder is the
possibility to make off line folds. For off line folding the same settings can be
made as for normal folding. By default, the predefined settings in the Settings
Editor for off line folding are used. Polyester or transparent media cannot be
folded. This may result in a media jam.
Note: Use off line folding only for sheets which do not exceed a maximum
length of 6 m. If you try to fold a sheet longer than 6 m anyway, an error occurs.
▼ ▼ ▼ ▼ Make off line folds
1 Switch the printer off line on the printer operating panel and wait for the printer
to finish the jobs that are already in the printer.
Note: Watch the light on the top cover of the folder.
■
If this is off, the printer is on line and off line folding is not possible.
■ If this is blinking slowly, the printer is off line, but the folder still processing
the last prints.
■
If this is blinking rapidly, an error has occurred.
■
If this is on, the printer is off line and you can feed a sheet.
Note: Also refer to the sticker on the top cover of the folder.
2 Make any settings for (off-line) folding on the printer operating panel.
Note: If required, the key operator can change the default settings for
folding programs from the Settings Editor. See ‘Océ Power Logic: Account
logging’ on page 225 for more information.
3 Feed the sheet of paper face down and with the legend on your right-hand side.
Also make certain that you feed the paper with the legend on the right-hand
side (see ‘Océ TDS600 folder’ on page 290 for more information).
Off line folding settings
Output length Delivery
‘Stacker’ or ‘Belt’
selected =< 2 m Delivered on stacker or belt
2 m - 2.5 m (2 folds) Delivered on stacker or belt
2 m - 2.5 m (3 folds) Stopped in second fold (possible
paper jam)
> 2.5 m Unfolded, delivered in IRT
‘First fold only’ selected < 6 m First fold only, delivered in first
fold delivery
[198] Off line folding settings