Oce North America TDS600 - Manual (Page 314)

314 Océ TDS600 Multifunctional Digital System User Manual
Instructions for safe use
Océ machines and materials have been developed and tested in accordance
with the strictest international safety standards. To ensure safe working with
these products it is important that you observe the following safety rules:
■ Do not remove any screws from fixed panels.
■
The machine is not user-serviceable except for the components and
maintenance materials mentioned in this manual.
■ Do not place any liquids in or on the machine.
■ Use maintenance materials or other materials for their original purpose only.
Keep maintenance materials away from children.
■
Do not mix cleaning fluids or other materials.
■ To avoid risks, all modifications to Océ equipment are strictly reserved for
Océ service personnel. It is recommended to use attachment cables specified
by Océ.
■
Do not bridge any mechanical or electrical circuit breakers.
■ Do not use an extension lead to connect the machine.
■ Locate the machine close to a dedicated 16 A wall socket that is easily
accessible.
■
The switch in the fixed connection (if any) should be easily accessible.
■
This machine has not been designed for connection to an IT power system.
(An IT power system is a voltage network in which the neutral wire is not
connected to earth).
■
Do not block the ventilation openings of the machine.
■
Ensure that the machine is placed on a level, horizontal surface of sufficient
strength. See the Océ TDS600 safety data sheet in this appendix for
information about the weight of the machine.
■
Ensure there is sufficient space around the machine. This facilitates
reloading materials as well as maintenance.
■ Do not place the machine in rooms which are subject to excessive vibration.
■ Do not place the machine in rooms which are too small and insufficiently
ventilated. See the Océ TDS600 safety data sheet in this appendix for
information about space and ventilation requirements.