Oce North America TDS600 - Manual (Page 27)

Use the Océ TDS600 to print 27
operate, but it is possible that the print quality is not optimal, e.g. ‘Fill B5
toner’.
A graphical overview of available rolls and sheet feeders, including the
material type and size used by each roll or sheet feeder.
■ A symbol indicating the paper orientation (for sheet feeders only).
■ An indication that a particular roll or sheet feeder is empty (if applicable).
An empty roll is represented by a dotted roll symbol.
An empty sheet feeder is displayed as an empty paper tray.
■ In the event of an error, a graphical representation of any error location
(cover or panel), together with instructions on how to solve the problem is
displayed.
Counter
On the operating panel of the Océ TDS600 Printer a counter will be displayed
that gives the user feedback about the progress of the job that is currently being
printed. The counter, which is located at the bottom of the upper window on
the operating panel, displays the number of sets and/or pages printed. Counting
starts at 1. The following options are available:
■ When no sets are made, only the current page and the total number of pages
are displayed (e.g. ‘Page 3 of 5’). At the beginning of a job, when the system
does not know the total number of pages yet, only the current page may be
displayed (e.g. ‘Page 5’).
■ With set input: set counter. In this case the counter shows the current, the
total number of sets and the current page (e.g. ‘Set 3 of 5, Page 10’). At the
beginning of a job, when the system does not know the total number of sets
yet, only the current set and page may be displayed (e.g. ‘Set 2, Page 5’).
■ With set input: multiple sheet counter. In this case the counter shows the
current page, the total number of pages and the current copy, e.g. ‘Page 2 of
12, Copy 5’). At the beginning of a job, when the system does not know the
total number of pages yet, only the current page and copy may be displayed
(e.g. ‘Page 2, Copy 5’).