Oce North America TDS600 - Manual (Page 93)

Special copy and scan jobs 93
[53] Selecting ‘Non-standard’ scan size
The copy size
The copy width depends on the selected roll or sheet feeder or the custom
defined scan width, whereas the copy length depends on the selected cut
option.
▼ ▼ ▼ ▼ Copy non-standard size originals
1 Press the ‘Media’ button in the ‘Sheet’ card of the ‘Print’ section to select
‘Automatic’, or to select the roll or sheet feeder with the correct width.
[54] Selecting roll or sheet feeder in the ‘Custom’ section
Note: The media can also be selected directly from the ‘Custom’ section.
Note: When ‘Automatic’ is selected, the roll or sheet feeder that is used is
indicated by the ‘ ❍ ’ symbol.
2 Press the ‘Cut length’ function button to select the required cut option:
■
Standard, which cuts copies at a standard length.
■
Synchro, which cuts copies at the end of the image. The system cuts at the
measured length of the original times the zoom factor.
■ Custom (numeric), which cuts copies on a specified length. You can define
the copy length yourself, using the arrow buttons or the numeric buttons.
3 Make other settings as required.
................