Oce North America TDS600 - Manual (Page 76)

76 Océ TDS600 Multifunctional Digital System User Manual
Note: Not all options are available to all users. You must log into a particular
user mode to perform specific tasks with Océ TDS600 Scan Manager (see
‘User modes’ on page 117).
Tree view
The tree view displays:
■ the system name
■ the collapsible destination tree
■ the collapsible temporary store tree.
If you scan to a particular destination, that destination is displayed bold and
the corresponding icon changes. The destination you scanned last to, is
displayed bold.
If you select a destination, to view it’s content in the right table view, this
destination will show selected. Figure 37 on page 75 shows that the destination
‘Temp10’ is selected.
If for any reason a scan to file cannot be sent to the appropriate remote
destination, the file will be stored in the ‘Unsent’ folder.
Table view
The table view (on the right side of figure 37 on page 75) displays the
filenames of the files in the opened destination or temporary folder.
Each file has the following information:
■ Name
■
Size
■
Type
■ Modified
■ Resolution
■
Image size.
If the currently viewed destination is the one you are scanning to, then the
scanned file will appear at the end of the table. If you currently view another
destination than the one you are scanning to, then the scanned to destination is
displayed bold.