Oce North America TDS600 - Manual (Page 224)

224 Océ TDS600 Multifunctional Digital System User Manual
TCP/IP
Setting Description
Domain To specify the network domain name. The network domain
name is the TCP/IP address of the domain server where the
Océ TDS600 controller is connected to.
DNS To specify the DNS server. Use semicolons ( ; ) to separate
entries.
Enable To define if the TCP/IP adapter is enabled or disabled, in or-
der to allow TCP/IP communication.
Enable DHCP To enable or disable the DHCP protocol, that lets network ad-
ministrators manage centrally and automate the assignment
of Internet Protocol. In order to make DHCP recognise your
system, a fixed IP address has to be configured.
IP address To specify the IP address for the server. A single adapter card
can have more than one adapter on it, so it is possible to spec-
ify several IP addresses.
IP mask To specify the IP subnet mask for the server. The subnet mask
is a number that when compared by the computer with a net-
work address number, will block out all but the necessary in-
formation.
Default gateway To specify the IP address of the default gateway. A gateway
connects networks using different protocols so that informa-
tion can be passed from one to the other. A gateway both
transfers information and converts it to a form compatible
with the protocols used by the receiving network.
Primary WINS
server Type the IP address for the primary WINS server. This uses
Windows Internet Name Service (WINS) protocol in combi-
nation with name query broadcasts to resolve computer
names to IP addresses.
Secondary WINS
server Type the IP address for the secondary WINS server. This uses
Windows Internet Name Service (WINS) protocol in combi-
nation with name query broadcasts to resolve computer
names to IP addresses.
IPX/SPX
Setting Description
Enable To define if the SPX adapter is enabled or disabled.
NetBeui
Setting Description
Enable To define if the NetBeui adapter is enabled or disabled.