Oce North America TDS600 - Manual (Page 49)

Use the Océ TDS600 to copy 49
[16] Selecting the required media
Note: You can also select the desired media from the ‘Custom’ section, if this
setting has been defined for this (see figure 14 on page 45).
Select the input mode
You can use the ‘Input mode’ setting to specify how a job will be sorted: the
‘Single sheet’ option treats each sheet as a separate job. ‘Multiple sheets’
produces the specified number of copies for each sheet in a job and then
continues with the next sheet. Graphically that would look something like this:
Note: An important characteristic of ‘Multiple sheets’ is that, if this setting is
selected, the active job is kept together and treated as a whole. In this case the
job cannot be interrupted by a high-priority copy job, and there will be no risk
of getting mixed output.
‘Set’ produces one copy for each sheet in a set and then continues with the next
copy of the entire set, as follows:
The current input mode can be closed by pressing the Stop button.
The currently selected input mode is indicated by the ‘ ● ’ symbol.
▼ ▼ ▼ ▼ Select the input mode
1 Select the ‘Feeding’ card in the ‘Original’ section.
2 Select the desired media with the ‘Input mode’ function button.
Access to
ial Access to
Page Interrupt
job
1 1 1 2 2 2 3 3 3 4 4 4 5 5 5
1 2 3 1 2 3 1 2 3 1 2 3 1 2 3