Oce North America TDS600 - Manual (Page 66)

66 Océ TDS600 Multifunctional Digital System User Manual
Océ Scan Logic
Océ Scan logic is an option which enables you to scan a document to a file for
later (re)use. You enable scan to file via a password (see ‘Scan Logic
password’ on page 190).
You use scan to file in order to:
■
print documents at a later time
■
archive documents
■ email documents
■ reuse the information documents contain in another application
A scan to file is made at the Océ TDS600 scanner. On the scanner operating
panel you can, among other things, choose at which resolution you want to
scan and where you want to store your file.
The result of the scan to file can be stored on the controller (temporary store)
or directed forward towards a network destination via Window’s Network
Neighbourhood.
Océ View Station LT, linked to the Océ Scan Manager application, enables you
to automatically or manually view the scanned documents afterwards.
Scan clicks
The Océ TDS600 counts the area of media that you scanned during scan to file
operations. You view the scan click count in the bottom right corner of the Océ
Scan Manager (see figure 31 on page 67).
The scan click count is measured in square feet or square meters. You set the
measurement unit in the Océ Settings Editor (see chapter , ‘Measurement’ on
page 88).