Oce North America TDS600 - Manual (Page 254)

254 Océ TDS600 Multifunctional Digital System User Manual
Maintenance of the reinforcement unit
This section covers maintenance activities for the optional reinforcement unit
of the folder, such as:
■ Inserting a new tape roll
■ Emptying the waste box
■
Cleaning the reinforcement knives
Attention: Only use the original reinforcement strips from Océ, to avoid
damage to the reinforcement unit.
A new tape roll
When the tape roll is empty while the engine is in stand-by, one of these
messages will appear on the display:
■
‘Load reinforcement tape’
■ ‘Reinforcement unit empty’ (if the engine was running when the roll ran out
of tape).
When a tape roll is empty while the engine is running, this message will be
accompanied by a picture of the engine with the side door of the reinforcement
unit blinking (see figure 142).
[142] No tape in reinforcement unit