Oce North America TDS600 User Manual
Page 250
250
Océ TDS600 Multifunctional Digital System User Manual
6
Move the toner bottle to a vertical position (see figure 138).
[138] Adding toner
7
Tap the bottle to remove the toner from the bottle.
8
Return the bottle to its original position when the toner bottle is empty.
9
Unscrew the toner bottle anti-clockwise and close it.
10
Close the cover.
Printing will be resumed after you press the ‘on line’ button.
Note:
When you have refilled toner after a ‘toner low’ message, it may take a
while (up to thirty seconds), depending on the number of prints that you make,
before the ‘Out of toner’ message disappears. When you have refilled toner
after the system had stopped because the toner supply was really exhausted,
you have to confirm the refill operation by pressing the On line button. The
‘Out of toner’ message will then disappear.