Oce North America TDS600 - Manual (Page 15)

Introduction 15
Océ TDS600 key concepts
Printer configuration The Océ TDS600 is available in a number of printer
configurations, ranging from two rolls in a single drawer (the minimum
configuration) to a maximum of six rolls with one sheet feeder and four rolls
with three sheet feeders. Also a number of optionals are available, including an
integrated folder, a copy delivery tray, paper roll loaders and a paper switch for
supporting customer finishing units.
Copy functionality With the Océ TDS600 scanner a large number of copy
activities can be performed. A wide variety of original and copy related
settings are supported. You can specify particular layout, media, finishing,
feeding and quality enhancement options from the scanner operating panel.
See ‘Product specifications Océ TDS600’ on page 303 for more information.
Océ Scan Logic The Océ TDS600 offers optional scan to file functionality.
Documents are scanned then stored digitally. Ten customised destinations are
supported.
Network connectivity The Océ TDS600 supports a number of popular network
protocols. This means that it can be used in multiple networking environments
such as TCP/IP, NetBEUI, and Novell Pserver (IPX/SPX).
Set processing The Océ TDS600 supports set processing. This means that a
job can consist of several files/originals. You can print/scan these
files/originals in multiple times and sorted. The Océ TDS600 is equipped with
a set memory for storing up to 250 A0s which allows for the creation of
identical sets that are sorted either by page or by set.
Print/copy job A print/copy job is a job sent to the Océ TDS600 Printer from
a user application (print job) or from the scanner (copy job). A print/copy job
may consist of several sets, which in turn may consist of several pages. Sorting
of a print/copy job may take place based on sets or on pages.
Spool memory The Océ TDS600 contains a spool memory which provides a
queuing system for files you want to print. The spool memory allows multiple
users to send print jobs to the Océ TDS600 simultaneously. The print jobs are
then placed in the print queue where they wait to be printed. The job that is put
first into the queue is printed first.