Oce North America TDS600 - Manual (Page 237)

Océ Power Logic: Account logging 237
Output media
source text Source from which the output media was taken in
case of physical output: ROLL1, ROLL2, ROLL3,
ROLL4, ROLL5, ROLL6, TRAY1, TRAY2,
TRAY3. MANUAL (manual feed slot). Empty if
no physical output.
Output fold
method text Folding method applied to the output media in
case of physical output:
For folding in 2 directions: AFNOR, ERICSSON,
DIN.
For folding in 1 direction: AFNOR1,
ERICSSON1, DIN1.
Empty if no physical output or not folded.
Output binding
method text Specifies the binding method for the output me-
dia. EDGEONLY (only binding edge), REIN-
FORCE. Empty if no physical output or no
binding method.
Output media
destination text Output media destination in case of physical out-
put: BELT1, BELT2, BELTS, CDT, IRT, FIRST-
FOLD, STACKER.
Empty if no physical output.
Output file type text Type of output file in case of digital output: TIFF,
CALS, PDF. Empty if no digital output.
Output file com-
pression text Compression method of output file in case of dig-
ital output: GROUP3, GROUP4, PACKBITS,
LZW. Empty if no digital output or no compres-
sion.
Output file size num 9 Size of output file in bytes (including all pages in
case of multi-page output files) in case of digital
output. Empty if no digital output.
Output file desti-
nation text 255 Nickname of the destination for the output file as
used in the scan manager, in case of digital output.
If multiple pages in one job have the same desti-
nation file, a multi-page file is generated. Empty if
no digital output.
Output resolu-
tion (width di-
rection) num 4 Resolution of output in width direction in dpi
Output resolu-
tion (height di-
rection) num 4 Resolution of output in height direction in dpi