Table a- 10: sch phase mode (opt sc only), Table a- 11: component vector mode, A-11 – Tektronix 1760 User Manual
Page 139
Appendix A: Performance Specification
A-11
1760 Series Component Waveform/Vector Monitor User Manual
Table A- 10: SCH Phase Mode (OPT SC Only)
CATEGORY
DESCRIPTION
Absolute Accuracy
Req:
≤5°
RI:
Applies over a temperature range of
0 -- 50
° C
RI:
Calibrated at 25
° C. ±3 dB input
amplitude. Typically
≤5° with
±6 dB input amplitude.
Relative Accuracy
RI:
2
°
Acquisition Time
RI:
≤1 Second
Displayed Phase Error Caused
by CRT Geometry Variations
RI:
±1.25°
Input Timing
RI:
Stable display with Video to External
Reference timing
Color Frame Range
RI:
±70° (Color frame correctly
identified when applied external refer-
ence signal is
≤70° of 0° SCH.)
Table A- 11: Component Vector Mode
CATEGORY
DESCRIPTION
Vertical Bandwidth
Req:
--3 dB at
≥1.0 MHz
Horizontal to Vertical
Bandwidth Matching
Req:
No eye opening at 500 kHz or 2 MHz
Vertical Gain Accuracy
Req:
±2.5%
RI:
With respect to graticule
Horizontal Gain Accuracy
Req:
±2.5%
RI:
With respect to graticule