Tektronix 1760 - Manual (Page 64)

Operator’s Checkout Procedure
1760 Series Component Waveform/Vector Monitor User Manual
2-26
VECTOR PHASE
Figure 2-18. PAL SCH display.
14. Lightning Display
For a Lightning display, select the Y, B--Y, R--Y format on
the signal generator. Enter the
CONFIG menu and select
FORMAT . Select the proper format for your signal source
(GBR, SMPTE/EBU, BETA or MII). Under DISPLAY, select
LIGHTNING . Leave the configuration menu selected.
Select LIGHTNING display mode. The display should be
similar to Figure 2-19.
Under DISPLAY , select DIAMOND . Select 100% Bars on the
signal generator. Figure 2-20 shows a sample display. Exit
the configuration menu. Information on using the Lightning
and Diamond displays appears on page 4-16.