Tektronix 1760 - Manual (Page 69)

1760 Series Component Waveform/Vector Monitor User Manual
3-1
Functional Overview
The Functional Overview describes instrument functions in
greater detail than At A Glance. For menu operation, refer to
page 3-7. Detailed Measurement procedures are given in
Basic Measurements, beginning on page 4-1.
Display Modes
Composite Component
H
VECTOR
• •
H SCH (Option SC only)
•
H WAVEFORM
• •
H AUDIO
• •
H
LIGHTNING and DIAMOND
•
H BOWTIE
•
H PICTURE
• •
H TIME CODE
• •
H MULTIPLE displays
• •
Vector
The vector mode presents an XY plot of demodulated chromi-
nance phase and amplitude. The angle represents chromi-
nance phase and the distance from the center represents
chrominance amplitude. A bezel control is assigned to adjust
VECTOR PHASE.
With a component input (A123 or B123), VECTOR displays
CH-3 (typically R--Y or P R ) versus CH-2 (typically B--Y or
P B ).