Tektronix 1760 User Manual
Page 60
Operator’s Checkout Procedure
1760 Series Component Waveform/Vector Monitor User Manual
2-22
9.
Line Selection
Line select is available in
WAVEFORM, VECTOR, SCH
, and
PICTURE
display modes. Enter the
LINE SELECT
menu and
turn the center bezel control until the readout displays
ALL
131
. In a two line display, line 131 appears on the left,
followed by line 132.
Select
2 FIELD
sweep and note the intensified line in each
field. Select
15H
and note that 15 lines are now intensified
in each field (intensified portion appears wider). The
readout is now
ALL 131---- 145
. See Figure 2-13.
Select
1 of2
. Now only the first field has intensified lines,
and a
NEXT FIELD
selection appears. Select
NEXT FIELD
and
note that the intensified lines now appear only in the second
field and the readout is
F2 131 F2 145.
Select
MULTIPLE
with
WAVEFORM, VECTOR,
and
SCH
. Note
that the displays appear in the following order:
WAVEFORM,
VECTOR, SCH.
Exit the line select menu. Enter the menu again and note
that the user settings are unchanged. Exit the menu.
LINE SEL
ALL131
FIELD
ALL 1OF2
1OF8
1OF4
1H
15H
-- -- 145
Figure 2-13. Line Select display with 15H selected, in 2 FIELD sweep.