Tektronix 1760 - Manual (Page 84)

Using the Menus
1760 Series Component Waveform/Vector Monitor User Manual
3-16
Line Select Menu
Pushing the LIN SEL menu button enables the line select mode
and provides a menu display. The center bezel control is
assigned to select the line number. The following choices
can be made using the bezel buttons that correspond to the
on-screen labels:
1760-- Series
H 1H or 15H (one line or 15 lines)
H FIELD
—
ALL or 1of 2
H NEXT FIELD
—
(Appears only when 1of 2 FIELD is
selected.) Push the corresponding bezel button to
sequence through the fields designated by the
FIELD
selection. A box flashes momentarily around the
on-screen label to verify that the selection has been
made.
1760-- Series Option SC
H FIELD
—
ALL or 1of2 or 1of 4 or 1of8
H 1H or 15H (one line or 15 lines)
H NEXT FIELD
—
(Appears only when 1of 2 , 1of4 , or
1of 8 FIELD is selected.) Push the corresponding
bezel button to sequence through the fields desig-
nated by the
FIELD selection.
H ALT 2 FIELD
—
(Appears only when 1of 4 FIELD is
selected.) Push the corresponding bezel button to
toggle between the current field and the second next
field; for example,
FIELD1 and FIELD3.
H ALT 4 FIELD
—
(Appears only when 1of 8 FIELD is
selected.) Push the corresponding bezel button to
toggle between the current field and the fourth next
field; for example,
FIELD1 and FIELD5.