Tektronix 1760 - Manual (Page 50)

Operator’s Checkout Procedure
1760 Series Component Waveform/Vector Monitor User Manual
2-12
Initial Equipment Connections
H Connect the 1760--Series to an appropriate AC power
source.
H Connect the generator NTSC output (COMPOSITE for
TSG131) to the CH-A input. Connect the CH-A loop-
through to the EXT REF input and connect a 75
Ω
terminator to the EXT REF loop-through. See
Figure 2-4.
H Connect the generator Y output to the CH-A1 input.
Connect B--Y to CH-A2 and R--Y to CH-A3. Connect a
75
Ω terminator to each loop-through.
H Set the generator FORMAT to NTSC (COMPOSITE for
PAL).
A A1 A2 A3
B B1 B2 B3
EXT
REF
1760---SERIES
NTSC
NTSC Y Y
B-Y R-Y
TSG 130---SERIES
Figure 2-4. Equipment hook-up for Operator’s Checkout Procedure.