Tektronix 1760 - Manual (Page 76)

Using the Menus
1760 Series Component Waveform/Vector Monitor User Manual
3-8
Clear Menu
Push CLEAR MENU to clear part of the menu display, but leave
essential readout elements such as control assignments and
measurement readouts. (The menu LED remains lighted to
show this state.) Push the menu button to bring back the full
display.
CRT, PRESET, and CONFIG menus will be exited completely
when CLEAR MENU is pushed.
Exiting a Menu Function
To exit a menu function while its display is present, push that
menu button. (The menu button is functioning as an on-off
toggle switch). If the menu display is not present, but the
menu function is still in effect (LED is lighted), push the
menu button to bring back the full display, then push it again
to exit the menu.
VERTPOS HORIZPOS
Bezel Controls
CLEAR
MENU
Bezel
Buttons
Left Center Right
DISPLAY
READOUT
TRACE
FOCUS SCALE INTENSITY
TEST
ON OFF
Figure 3-1. The CRT menu, showing bezel controls and bezel buttons.