Tektronix 1760 - Manual (Page 40)

At A Glance
1760 Series Component Waveform/Vector Monitor User Manual
2-2
H Depress and hold the CLEAR MENU and WAVEFORM
buttons while you turn instrument power on again.
Hold both buttons in until the instrument returns to
its normal operating state.
H If this reset does not unlock the controls, contact
your Tektronix field office or call Tektronix at the
phone number listed in the front of this manual.
Multi-use Controls
H The center three controls located under the CRT have
functions assigned and labeled through the on-
screen menus and readouts. These controls will be
referred to as
Bezel Controls. See Figure 2-1.
H Five small buttons along the right side of the CRT
enable users to make selections from on-screen
menus. These buttons will be referred to as
Bezel
Buttons.
VERTPOS HORIZPOS
Three Bezel Controls
CLEAR
MENU
Five
Bezel
Buttons
Figure 2-1. Multi-Use Bezel Controls and Buttons.