ZyXEL Communications IP PBX X6004 - Manual (Page 300)

Chapter 18 Outbound Line Group
X6004 User’s Guide
300
18.6 Add/Edit Trusted Peer
The screens for editing or adding trusted peers on the X6004 contain the same
fields. Only the screen used to add a trusted peer is shown below. Click the Add
(or Edit) icon in the Trusted Peer section of the Outbound Line Group
configuration screen to view the screen as shown.
Figure 158 Add/Edit Trusted Peer
Each field is described in the following table.
Table 98 Add/Edit Trusted Peer
LABEL DESCRIPTION
Machine ID Select the ID of the X6004 on which you want to configure the trusted
peer. This is an internal name (not configurable) of the X6004. Only one
choice is shown if you have not configured ZyStack.
This field is not available when editing a Trusted Peer configuration.
Group Name Type the name of this trusted peer connection. This field can be 1-20
alphanumeric characters (A-Z, a-z, 0-9) and underscores (_).
Description Type the description for this trusted peer connection. This field can be
0-63 alphanumeric characters (A-Z, a-z, 0-9), underscores (_),
hyphens (-) and spaces. 0 means this field can be left blank.
Apply Click this to save your changes.
Back to
Outbound
Group Click this to go to the Outbound Line Group screen without saving
your changes.