ZyXEL Communications IP PBX X6004 - Manual (Page 322)

Chapter 19 Auto-Attendant
X6004 User’s Guide
322
4
Specify the file format. In the Sound Selection window. Choose CCITT µ-Law in
the Format field. Next, select the playback sound quality by choosing the
frequency of the playback audio file. Higher frequency results in better sound but
larger file size. Typically the setting 8.000 kHz, 8 Bit, Mono 7 kb/sec is
sufficient for auto-attendant recordings. Press OK when you are done.
Figure 175 Audio File Settings
5
Confirm your settings. Specify a location for the audio file by browsing to a
suitable location on your file system. Click Save when you are finished.
Figure 176 Confirm File Settings