ZyXEL Communications IP PBX X6004 User Manual
Page 76
Chapter 3 Tutorials
X6004 User’s Guide
76
1
In the web configurator, click Configuration > PBX > Outbound Line
Management > LCR to open the following screen.
2
Click the Edit icon in the long_distance_call section to open the following
screen. Select the outbound line group from the pool column that you want to add
to this LCR (in our example this is IPPBX_001:ITSP1 as configured in
), then click the Right icon to move it to the Selected column.
Click Apply to save the outbound line group in the LCR and then click the Add
icon to configure a dial condition.
3
The Dial Condition screen appears as shown.
• Type 1XXXXX followed by a period (.) in the Dial Condition field. This
means that this LCR will be used when callers dial any 7 or greater digit
number that begins with a 1. The X stands for any digit 0 to 9 and is used to
create a minimum length condition. The period (.) is a wildcard indicating that
any number can follow the 1XXXXX condition.
• Test the dial condition. In our example, we tested the number 1212555555
to see if it matches our dial condition. You can test any number by typing it in
the Number Pattern Test field and clicking the Right icon; an
O
appears if
the number typed in matches the dial condition and an
X
appears if it does not
match the dial condition.