ZyXEL Communications IP PBX X6004 - Manual (Page 339)

Chapter 21 Group Management
X6004 User’s Guide
339
Each field is described in the following table.
Table 112 Group Management > Overview
LABEL DESCRIPTION
Test Number Enter a number to test with the selected Authority Group and then click
the Test button.
Direction Select a call Direction from this menu. This indicates the direction from
the source number to the destination number you want to test.
The direction that you select determines which items appear in the call
Source columns and the call Destination columns.
• IN to IN - Calls tested are internal to internal.
• IN to OUT - Calls tested are internal to external.
• OUT (FXO Trunk) to IN - Calls tested are external on the FXO
trunk to an internal connection.
• OUT (PRI Trunk) to IN - Calls tested are external on the PRI trunk
to an internal connection.
• OUT (BRI Trunk) to IN - Calls tested are external on the BRI trunk
to an internal connection.
• OUT (SIP Trunk) to IN - Calls tested are external on the SIP trunk
to an internal connection.
• OUT (Trusted Peer) to IN - Calls tested are external from a
Trusted Peer to an internal connection.
• OUT (FXO Trunk) to OUT - Calls tested are external on the FXO
trunk to another external connection.
• OUT (PRI Trunk) to OUT - Calls tested are external on the PRI
trunk to another external connection.
• OUT (BRI Trunk) to OUT - Calls tested are external on the BRI
trunk to another external connection.
• OUT (SIP Trunk) to OUT - Calls tested are external on the SIP
trunk to another external connection.
• OUT (Trusted Peer) to OUT - Calls tested are external from a
Trusted Peer to another external connection.
Source This table displays available call sources based on the selected Call
Scenario.
For example, if your call scenario is IN to OUT, then this column
displays the call sources for any configured authority groups.
Destination This table displays available call destinations. based on the selected
Call Scenario.
For example, if your call scenario is IN to OUT, then this column
displays the available call destinations.
Description This popup window appears when you click an item in either the
Source or Destination columns. It displays the description that is
associated with the item.