ZyXEL Communications IP PBX X6004 - Manual (Page 58)

Chapter 3 Tutorials
X6004 User’s Guide
58
2
Click the Add icon to open the following screen. Enter the name of the group
(Basic in this example) and click Add. The Machine ID field is a name
automatically assigned to the X6004.
3
The new authority group displays in the following screen. Now you will add SIP
extensions to the authority group. Click the new authority group’s Advanced
icon.
4
The following screen displays. Click Batch Add to configure multiple SIP accounts
at the same time.
5
Configure the screen as shown next. The SIP extension number and any
configured SIP Auth. Password prefix and/or postfix make up the SIP password.
The SIP password must be at least four digits. This example uses ten four-digit
SIP extensions 1001 - 1010 that are also used as the SIP usernames. The SIP
passwords are comprised of the combination of Prefix + Extension + Postfix. In
this example, the SIP Auth. Password Prefix value is 11 and the Postfix value