ZyXEL Communications IP PBX X6004 - Manual (Page 63)

Chapter 3 Tutorials
X6004 User’s Guide
63
2
Enter the SIP device’s MAC address (or serial number if it is a ZyXEL softphone).
This example is for a softphone with a serial number of 1234567890. Click Set
Profile.
3
The serial number of the softphone that is to use the SIP extension displays in the
summary screen.
4
Repeat these steps to map each SIP extension to a SIP device’s MAC address or
serial number.
3.1.4.1 Configuring the IP Phones for Auto Provisioning
Configure the ZyXEL IP phones to receive configuration information from the
X6004. This typically involves enabling auto provisioning and specifying the
protocol to use (HTTP at the time of writing). See the documentation that came
with your ZyXEL IP phone for information on how to do this.
Once the IP phones receive their configuration information via auto provisioning,
they will automatically register with the X6004. You can make internal calls by
dialing the extension number assigned to each phone.