ZyXEL Communications IP PBX X6004 - Manual (Page 388)

Chapter 25 System Information
X6004 User’s Guide
388
Each field is described in the following table.
Table 143 Monitor > System Information
LABEL DESCRIPTION
System
Information
#
This field displays the index number of the X6004. If you have a
ZyStack configured then this screen displays information about all the
X6004 in the ZyStack.
IP Address These two fields display the IP addresses of the WAN and LAN
interfaces on the X6004.
ZyStack This field displays:
Master - if the X6004 is the master for all of the X6004s in a ZyStack.
This field also displays Master if this X6004 is set up as a stand alone IP
PBX.
Slave - if this X6004 is a slave in a ZyStack.
Status This field displays:
On - If the X6004 is powered on.
Off - If this X6004 is not receiving power.
F/W Version This field displays the firmware version currently installed on the
X6004.
Hardware
Information
#
This field displays the index number of the X6004. If you have a
ZyStack configured then this screen displays information about all the
X6004 in the ZyStack.
CPU(MIPS) This field displays the speed of the processing chip on the X6004 in
MIPS (Millions of Instructions Per Second).
Memory(MB) This field displays the total RAM memory available on the X6004. This is
the memory available for processing functions on the X6004.
File System This field displays the total memory available for the files system on the
X6004. The file system stores information such as configuration
settings, CDR and voice mail. This number is the sum of the built in
flash memory and the optional hard disk (if installed).
Trunk(port#) These fields display the number of FXO ports (ports leading to the
PSTN), FXS ports (ports leading to analog phones on your network),
ISDN BRI or PRI ports (ports leading to the ISDN) installed on the
X6004.
DSP This field displays the capacity of the DSP (Digital Signal Processing)
modules installed on the X6004. The capacity is displayed in the
number of channels the X6004 can process at any one time.
IPPBX
Information
#
This field displays the index number of the X6004. If you have a
ZyStack configured then this screen displays information about all the
X6004 in the ZyStack.