ZyXEL Communications P-202 User Manual
Page 101
P-202H Plus v2 Support Notes
3. Incoming Data Call Matching: This setting helps the P-202H Plus v2 to
forward the incoming call correctly by checking the MSN or subaddress
that the remote party calls.
MSN: When this option is selected, the P-202H Plus v2 checks the
MSN called by the remote party. If the MSN matches the one
configured in menu 2, ISDN Data Number, the P-202H Plus v2 will
answer the call as a data call. If the MSN does not match any MSN
in menu 2, the P-202H Plus v2 will answer the call as a CAPI call
and forward it to the CAPI client.
Subaddress: When this option is selected, the P-202H Plus v2
checks the subaddress called by the remote party. If the
subaddress matches the one configured in menu 2, ISDN Data
Number, the P-202H Plus v2 will answer the call as a data call. If
the subaddress does not match any subaddress in menu 2, the P-
202H Plus v2 will answer the call as a CAPI call and forward it to
the CAPI client.
NetCAPI: When this option is selected, the P-202H Plus v2 always
answers the call as a CAPI call and forward it to the CAPI client.
4. Access List: Enter the IP range of the valid NetCAPI clients with desired
operation direction.
Operation=Incoming: this permits the clients in this IP range to
only answer calls.
Operation=Outgoing: this permits the clients in this IP range to
only place calls.
Operation=Both: this permits the clients in this IP range to both
place and answer calls.
Operation=None: this means no calls for the clients in this IP
range are allowed.
5. Start IP: Refers to the first IP address of a group of NetCAPI clients. Each
group contains contigunous IP addresses.
6. End IP: Refers to the last IP address in a NetCAPI client group.
7. Operation: Call control settings for the NetCAPI users
Incoming: When this option is selected, the NetCAPI users have
permission to only accecpt incoming calls.
Outgoing: When this option is selected, the NetCAPI users have
permission to only place outgoing calls.
Both: When this option is selected, the NetCAPI users have
permission for both answering and placing calls.
None: When this option is selected, no calls are allowed for the
NetCAPI users.
•
CAPI CI commands
All contents copyright © 2006 ZyXEL Communications Corporation.
101