ZyXEL Communications P-202 User Manual
Page 46
P-202H Plus v2 Support Notes
pcAnywhere 8.0
None
5631/client IP
5632/client IP
22/client IP
1
Since SUA enables your LAN to appear as a single computer to the Internet, it
is not possible to configure similar servers on the same LAN behind SUA.
2
Because White Pine Cu-SeeMe uses dedicate ports (port 7648 & port 24032) to
transmit and receive data, therefore only one local Cu-SeeMe is allowed within
the same LAN.
3
With SUA enabled, NetMeeting users within the same LAN will not be able to
connect to the remote NetMeeting user, and as remote users are not able to
distinguish between local users with the same internet IP and SUA allows one
local NetMeeting user to connect to multiple Internet users at the same time.
4
Certain Quake servers do not allow multiple users to login using the same
unique IP, so only one Quake user will be allowed in this case. Moreover, when a
Quake server is configured behind SUA, P-202H Plus v2 will not be able to
provide information of that server on the internet.
5
Quake II has the same limitations as that of Quake I.
Notes
1. If a SMTP (port 25) server is configured in menu 15 the POP3 ( port 110)
packets will also be forwarded to the same SMTP server by the P-202H
Plus v2 automatically. There is no need to configure additional POP3
server in menu 15. Two ports (25 & 110) must be configured in menu 15
to support both SMTP and POP3 services.
2. NetMeeting, RealPlayer, IP/TV and Quick Time are supported.
Configurations
For example, if the workstation operating Cu-SeeMe has an IP of 192.168.1.34,
then the default SUA server must be set to 192.168.1.34. The peer Cu-SeeMe
user can reach this workstation by using P-202H Plus v2's WAN IP address
which can be obtained from menu 24.1.
All contents copyright © 2006 ZyXEL Communications Corporation.
46