ZyXEL Communications P-202 User Manual
Page 89
P-202H Plus v2 Support Notes
2. Edit the file /etc/syslog.conf by adding the following line at the end of the
/etc/syslog.conf file.
local1.* /var/log/zyxel.log
Where /var/log/zyxel.log is the full path of the log file.
3. Restart syslogd.
•
ZyXEL Syslog Message Format
P-202H Plus v2 sends 5 types of syslog messages to syslogd, they are:
1. CDR log
2. Packet Triggered log
3. Filter log
4. PPP log
5. POTS log
CDR
Call Detail Record (CDR) logs all data phone line activity if set to
Yes.
Packet
triggered
The first 48 bytes or octets and protocol type of the triggering
packet is sent to the UNIX syslog server when this field is set to
Yes.
Filter log
No filters are logged when this field is set to No. Filters with the
individual filter Log field set to Yes are logged when this field is
set to Yes.
PPP log
PPP events are logged when this field is set to Yes.
POTS log
Voice calls are logged when this field is set to Yes.
1. CDR log(call messages)
Format:
sdcmdSyslogSend( SYSLOG_CDR, SYSLOG_INFO, String );
String = board xx line xx channel xx, call xx, str
board = the hardware board ID
line = the WAN ID in a board
channel = channel ID within the WAN
call = the call reference number which starts from 1 and increments by 1 for each
new call
str = C01 Outgoing Call dev xx ch xx (dev:device No. ch:channel No.)
C01 Incoming Call xxxxBps xxxxx (L2TP,xxxxx means Remote Call ID)
All contents copyright © 2006 ZyXEL Communications Corporation.
89