ZyXEL Communications P-202 User Manual
Page 124
P-202H Plus v2 Support Notes
Please note that the fields in this menu are read-only. However, the settings of
the server set 1 can be modified in menu 15.2.1.
Now let's look at Option 1 in Menu 15.1. Enter 1 to bring up this menu.
Menu 15.1.1 - Address Mapping Rules
Set Name= ?
Idx Local Start IP Local End IP Global Start IP Global End IP Type
--- --------------- --------------- --------------- --------------- ------
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Action= Edit , Select Rule= 0
Press ENTER to Confirm or ESC to Cancel:
We will just look at the differences from the previous menu. Note that, this screen
is not read only, so we have extra Action and Select Rule fields. Not also that the
[?] in the Set Name field means that this is a required field and you must enter a
name for the set. The description of the other fields is as described above. The
Type, Local and Global Start/End IPs are configured in Menu 15.1.1 (described
later) and the values are displayed here.
Field
Description
Option
Set Name
Enter a name for this set of rules. This is a required field.
Please note that if this field is left blank, the entire
set will be deleted.
Rule1
Action
They are 4 actions. The default is Edit. Edit means you
want to edit a selected rule (see following field). Insert
Before means to insert a new rule before the rule
selected. The rule after the selected rule will then be
moved down by one rule. Delete means to delete the
Edit
Insert Before
Delete
Save Set
All contents copyright © 2006 ZyXEL Communications Corporation.
124