ZyXEL Communications P-202 User Manual
Page 156
P-202H Plus v2 Support Notes
2. Setup P-202H Plus v2 VPN
1. Using a web browser, login P-202H Plus v2 by giving the LAN IP address
of P-202H Plus v2 in URL field. Default LAN IP is 192.168.1.1, default
password to login web configurator is 1234.
2. Click Advanced, and click VPN tab on the left.
3. On the SUMMARY menu, Select a policy to edit by clicking Edit.
4. On the CONFIGURE-IKE menu, check Active check box and give a name
to this policy.
5. Select IPSec Keying Mode to IKE and Negotiation Mode to Main, as we
configured in Soft-PK.
6. Source IP Address Start and Source IP Address End are PC 2 IP in
this example. (the secure host behind P-202H Plus v2)
7. Destination IP Address Start and Destination IP Address End are PC
1 in this example. (the secure remote host) Note: You may assign a range
of Source/Destination IP addresses for multiple VPN sessions.
8. My IP Addr is the WAN IP of P-202H Plus v2.
9. Secure Gateway IP Addr is the remote secure gateway IP, that is PC 1 in
this example.
10. Select Encapsulation Mode to Tunnel.
11. Check the ESP check box. (AH can not be used in SUA/NAT case)
12. Select Encryption Algorithm to DES and Authentication Algorithm to
SHA1, as we configured in Soft-PK.
13. Enter the key string 12345678 in the Preshared Key text box, and click
Apply.
All contents copyright © 2006 ZyXEL Communications Corporation.
156