ZyXEL Communications P-202 - Manual (Page 121)

P-202H Plus v2 Support Notes
default NO to Yes, then press [ENTER] to bring up Menu 11.3-Remote Node
Network Layer Options.
The following table describes the options for Network Address Translation.
Field Options Description
Full Feature
When you select this option the SMT will
use Address Mapping Set 1 (Menu 15.1-
see later for further discussion).
None
NAT is disabled when you select this
option.
Network Address
Translation
SUA Only
When you select this option the SMT will
use Address Mapping Set 255 (Menu
15.1-see later for further discussion). This
option us basically Many-to-One Overload
mapping. Select Full Feature when you
require other mapping types. It is a
convenient, pre-configured, read only,
Many-to-One mapping set, sufficient for
most purposes and helpful to people
already familiar with SUA in previous
ZyNOS versions. Note that there is also a
Server type whose IGA is 0.0.0.0 in this
set.
Table: Applying NAT in Menu 4 and Menu 11.3
2. Configuring NAT
To configure NAT, enter 15 from the Main Menu to bring up the following
screen.
Menu 15 - NAT Setup
1. Address Mapping Sets
2. NAT Server Sets
3. Address Mapping Sets and NAT Server Sets
All contents copyright © 2006 ZyXEL Communications Corporation.
121