ZyXEL Communications P-202 User Manual
Page 125
P-202H Plus v2 Support Notes
selected rule and then all the rules after the selected
one will be advanced one rule. Save Set means to save
the whole set (note when you choose this action the
Select Rule item will be disabled).
Select
Rule
When you choose Edit, Insert Before or Save Set in
the previous field the cursor jumps to this field to allow
you to select the rule to apply the action in question.
1
Note: Save Set in the Action field means to save the whole set. You must do this
if you make any changes to the set-including deleting a rule. No changes to the
set take place until this action is taken. Be careful when ordering your rules as
each rule is executed in turn beginning from the first rule.
Selecting Edit in the Action field and then selecting a rule brings up the following
menu, Menu 15.1.1.1-Address Mapping Rule in which you can edit an
individual rule and configure the Type, Local and Global Start/End IPs displayed
in Menu 15.1.1.
Menu 15.1.1.1 - - Rule 1
Type: One-to-One
Local IP:
Start= 0.0.0.0
End = N/A
Global IP:
Start= 0.0.0.0
End = N/A
Server Mapping Set= N/A
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this screen.
Field
Description
Option/Example
Type
Press [SPACEBAR] to toggle through a total of
5 types. These are the mapping types discussed
above plus a server type. Some examples follow
to clarify these a little more.
One-to-One
Many-to-One
Many-to-Many
Overload
All contents copyright © 2006 ZyXEL Communications Corporation.
125