ZyXEL Communications P-202 - Manual (Page 299)

P-202H Plus v2 Support Notes
2. Setup P-202H Plus v2 VPN
1. Using a web browser, login P-202H Plus v2 by giving the LAN IP address
of P-202H Plus v2 in URL field. Default LAN IP is 192.168.1.1, default
password to login web configurator is 1234.
2. Go to Advanced -> VPN
3. Check Active box to enable this rule. Check Keep alive to make your
VPN connection stay permanent.
4. Select Negotiation Mode to Main, as we configured in Sentinel.
5. Local IP, Address Type is Subnet, Address Start is 192.168.1.0,
End/Subnet Mask is 255.255.255.0.
6. Remote IP, leave it as default setup. 0.0.0.0/0.0.0.0
7. My IP Addr is the WAN IP of P-202H Plus v2.
8. Secure Gateway IP Addr is 0.0.0.0.
9. Select Encapsulation Mode to Tunnel.
10. Check the ESP check box. (AH can not be used in SUA/NAT case)
11. Select Encryption Algorithm to DES and Authentication Algorithm to
MD5, as we configured in Sentinel.
12. Enter the key string 12345678 in the Preshared Key text box, and click
Apply.
13. Press Advanced button to set IKE phase 1 and phase 2 parameters.
All contents copyright © 2006 ZyXEL Communications Corporation.
299