ZyXEL Communications P-202 - Manual (Page 135)

P-202H Plus v2 Support Notes
Press ESC or RETURN to Exit:
Step 3:
Now we configure all other incoming traffic to go to our web server aand mail
server from Menu 15.2.2 - NAT Server Setup (not Set 1, Set 1 is used for SUA
Only case).
Menu 15.2 - NAT Server Setup (Used for SUA Only)
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 0.0.0.0
2. 80 80 192.168.1.10
3. 25 25 192.168.1.11
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 0 0 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
4. Support Non NAT Friendly Applications
Some servers providing Internet applications such as some mIRC servers do not
allow users to login using the same IP address. In this case it is better to use
Many-to-Many No Overload or One-to-One NAT mapping types, thus each user
login to the server using a unique global IP address. The following figure
illustrates this.
All contents copyright © 2006 ZyXEL Communications Corporation.
135