ZyXEL Communications P-202 - Manual (Page 184)

P-202H Plus v2 Support Notes
6. In DNS Settings, enter the DNS IP.
7. Click Update to save the settings to SonicWALL.
8. Click DHCP, enable DHCP, and the Dynamic Ranges.
9. Click VPN, click Configure tab.
10. In Security Association option, select Add New SA.
11. In IPSec Keying Mode option, select IKE using pre-shared secret.
12. In Name option, give a name for this SA.
13. In IPSec Gateway Address, enter P-202H Plus v2 WAN IP
14. In Encryption Method option, select Encrypt and Authenticate (ESP
DES HMAC MD5).
15. In Shared Secret option, enter 12345678 as the secret key.
16. Click Add New Network.
17. In Edit VPN Destination Network, enter remote secure host in Network
field, PC 1 in the case. And also enter its subnet mask and click Update.
18. Click Update to save VPN settings in VPN menu.
See the screen shot:
All contents copyright © 2006 ZyXEL Communications Corporation.
184