ZyXEL Communications P-202 - Manual (Page 85)

P-202H Plus v2 Support Notes
Menu 21.2 - Filter Rules Summary
# A Type Filter Rules M m n
- - ---- --------------------------------------------- - - -
1 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=137 N D N
2 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=137 N D N
3 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=138 N D N
4 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=138 N D N
5 Y IP Pr=6, SA=0.0.0.0, DA=0.0.0.0, DP=139 N D N
6 Y IP Pr=17, SA=0.0.0.0, DA=0.0.0.0, DP=139 N D F
Apply the filter set 'NetBIOS_WAN' to the 'Protocol Filter' of the 'Call Filter Sets='
in the remote node setup 11.5 for taking active. You can enter to the menu 11.5
by selecting the 'Edit Filter Sets=' in menu 11.1 to 'Yes'.
Menu 11.1 - Remote Node Profile
Rem Node Name= hinet Route= IP
Active= Yes Bridge= No
Call Direction= Outgoing Edit PPP Options= No
Incoming: Rem IP Addr= 0.0.0.0
Rem Login= N/A Edit IP/IPX/Bridge= No
Rem Password= N/A Telco Option:
Rem CLID= N/A Allocated Budget(min)= 0
Call Back= N/A Period(hr)= 0
Outgoing: Transfer Type= 64K
My Login= masterbc Nailed-Up Connection= No
My Password= ******** Session Options:
Authen= CHAP/PAP Edit Filter Sets= Yes
Pri Phone #= 4125678 Idle Timeout(sec)= 300
Sec Phone #=
All contents copyright © 2006 ZyXEL Communications Corporation.
85
Menu 11.5 - Remote Node Filter
Input Filter Sets: