ZyXEL Communications P-202 - Manual (Page 130)

P-202H Plus v2 Support Notes
2. Internet Access with an Internal Server
In this case, we do exactly as above (use the convenient pre-configured SUA
Only set) and also go to Menu 15.2.1-NAT Server Setup (Used for SUA Only)
to specify the Internet Server behind the NAT as shown in the NAT as shown
below.
Menu 15.2 - NAT Server Setup (Used for SUA Only)
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 0.0.0.0
2. 80 80 192.168.1.33
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 0 0 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:
All contents copyright © 2006 ZyXEL Communications Corporation.
130