ZyXEL Communications P-202 User Manual
Page 75
P-202H Plus v2 Support Notes
•
IP Mask..........................here the IP mask is used to mask the bits of the
IP address given in the 'Source IP Addr=' field, for one workstation it is
255.255.255.255.
•
Action Matched................Set to 'Drop' to drop all the packets from this
client
•
Action Not Matched.........Set to 'Forward' to allow the packets from other
clients
3. Apply the filter set number '1' in the 'Call Filter Set' field of SMT menu 11.5 for
taking active.
Menu 11.1 - Remote Node Profile
Rem Node Name= Hinet Route= IP
Active= Yes Bridge= No
Call Direction= Outgoing Edit PPP Options= No
Incoming: Rem IP Addr= 0.0.0.0
Rem Login= N/A Edit IP/IPX/Bridge= No
Rem Password= N/A Telco Option:
Rem CLID= N/A Allocated Budget(min)= 5
Call Back= N/A Period(hr)= 1
Outgoing: Transfer Type= 64K
My Login= qwer Nailed-Up Connection= No
My Password= ******** Session Options:
Authen= CHAP/PAP Edit Filter Sets= Yes
Pri Phone #= 4125678 Idle Timeout(sec)= 300
Sec Phone #=
Press ENTER to Confirm or ESC to Cancel:
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
All contents copyright © 2006 ZyXEL Communications Corporation.
75