ZyXEL Communications P-202 User Manual
Page 382
P-202H Plus v2 Support Notes
The 192.168.1.1 is the IP address of the P-202H Plus v2. The local file is the
source file of the ZyNOS firmware that is available in your hard disk. The remote
file is the file name that will be saved in P-202H Plus v2. Check the port number
69 and 512-Octet blocks for TFTP. Check 'Binary' mode for file transfering.
Using TFTP to upload/download SMT configurations via LAN
o
TELNET to your P-202H Plus v2 first before running the TFTP
software
o
Type the CI command 'sys stdio 0' to disable console idle timeout
in Menu 24.8 and stay in Menu 24.8
o
Run the TFTP client software
o
To download the SMT configuration, please get the remote file
'rom-0' from the P-202H Plus v2.
o
To upload the SMT configuration, please save the remote file as
'rom-0' in the P-202H Plus v2.
An Example:
The 192.168.1.1 is the IP address of the P-202H Plus v2.
The local file is the source file of your configuration file that is available in
your hard disk.
The remote file is the file name that will be saved in P-202H Plus v2.
Check the port number 69 and 512-Octet blocks for TFTP.
Check 'Binary' mode for file transfering.
•
Using TFTP command on Windows NT
All contents copyright © 2006 ZyXEL Communications Corporation.
382