Xerox 490 - Manual (Page 203)

Xerox 490/980 Color Continuous Feed Printing System Resource Management
Printer & PC GUI Guide 10-47
Copy Color Resource File
Select the source file from the color resource list, and select [Copy] to display the Copy screen.
The following options are available:
• Close: Cancels the operation.
• OK: Copies the color resource file.
• Source: Display only, and cannot be edited.
• Destination: Select the Resource Set Name from the pull-down menu. Select the Resource
File Name input area to display the virtual keyboard. Input the destination color resource
file name.
Note
The file name length is up to 31 characters excluding the extension (".cntl" and "trc").
Export Color Resource File
It is possible to export a color resource file to the removable media. Select the exporting file
from the resource list and select [Export] to display the Export screen.
The following options are available:
• Close: Cancels the exporting operation.
• OK: Exports the resource file.
If any file with the same exists at the destination, the check screen appears. Operate according
to the displayed message.
Export can be confirmed by selecting the export destination directory at the save destination
directory.
At the export destination, the .cntl and .trc files are written.