I/o process for a held job, Delete job after printing -20, I/o process for a held job -20 – Xerox 490 User Manual
Page 68
Job Management
Xerox 490/980 Color Continuous Feed Printing System
6-20
Printer & PC GUI Guide
Delete Job After Printing
Specify what to do with the job after it has printed. Selectable from among Manual,
Immediately and Timed Job.
Timed Job: The job is automatically deleted from the job queue when a specified period of
time expires after completion of its printing. If a job has Timed Job specified in Delete Job After
Printing it remains in the job list on the Completed Job tab for an appointed period of time after
printing. The period of time for which a completed job stays in the job list until it is deleted can
be specified in minutes.
Manual: Saves the job without deleting it from the job queue when the print has completed,
along with the spooled data. To delete a job whose Delete Job after Printing is set to Manual
select it from the list appearing on the Completed Job tab and delete it.
Immediately: Deletes the job immediately upon completion of its printing.
I/O process for a Held Job
The information on the input/output process set in the queue appears.
The contents displayed under the I/O Process tab look similar to the following: