Time setting, Refresh rate, Time setting -5 refresh rate -5 – Xerox 490 User Manual
Page 221
Xerox 490/980 Color Continuous Feed Printing System
System Management
Printer & PC GUI Guide
11-5
Time setting
Select the Time display area to display the virtual keyboard.
Set the virtual ten-key pad as follows.
(Example 1) To set 10:00:00, input 10, 1000, or 100000.
(Example 2) To set 10:20, input 1020 or 102000.
•
Select [Cancel] to cancel the operation.
•
Select [OK] to set the time.
Operating buttons: Operating buttons are enabled upon setting the date and time.
•
Select [Cancel] to cancel the date/time setting modifying operation.
•
Select [OK] to set the modified content.
When the System Time is modified, the following check message appears and the printer
restarts.
Refresh Rate
This setting is for automatic updating of the job list.
Select the numeric input area to display the virtual ten-key pad.
The value can be input in units of 0 to 60 seconds.
It is recommended to set 5 seconds or more to avoid system overloading.
Numeric input area