Delete printed job, Immediately delete printed job – Xerox 490 User Manual
Page 86
Job Management
Xerox 490/980 Color Continuous Feed Printing System
6-38
Printer & PC GUI Guide
•
Time specification: Touch the time specification area to display the virtual ten-key pad.
The time is specified as follows. (Example 1) To set 10:00:00, input 10, 1000, or 100000.
(Example 2) To set 10:20, input a020 or 102000.
•
Lapse time setting: The job is held upon the lapse of the set time. Lapse time is counted
from the time of this setting. Select the icon in the lapse time specification area and touch
the numerical input area to display the virtual ten-key pad. A value from 1 to 43200 can be
set. If 0 is specified, the immediate deletion is set. Select [OK] to set the date & time and
close the screen. Select [Cancel] to cancel the operation and close the screen.
Delete Printed Job
Select to hold a job that is released by the operator. If the manual mode is set, the job will be
held in the input spool until the operator starts the operation.
Immediately Delete Printed Job
Select this to delete the job after printing.