Xerox 490 - Manual (Page 84)

Job Management Xerox 490/980 Color Continuous Feed Printing System
6-36 Printer & PC GUI Guide
Lapse time setting: The job is held upon the lapse of the set time. Lapse time is counted from
the time of this setting. Select the icon in the lapse time specification area and touch the
numerical input area to display the virtual ten-key pad. A value from 1 to 43200 can be set.
If 0 is specified, the manual holding is released.
Select [OK] to set the date and time. Select [Cancel] to cancel the operation.
Setting Manual Release
Select manual release to hold a job that is released by the operator. If the manual mode is set,
the job will be held in the input queue until the operator starts the operation.