Xerox 490 - Manual (Page 235)

Printer & PC GUI Guide 13-1
13
Server and Input
Function
FTP Server Connecting Function
The FTP server connecting function conducts authentication of the host and user, data transfer
settings, reception of a print data file, response of the job status, cancellation of a job, response
of the printer status, and end of connection from the host, which acts as an FTP client, using the
FTP protocol while this device acts as an FTP server.
This section explains about the information necessary for using the data and functions for
connection with the FTP server.
FTP Installation Commands
Command Description Installed or not
USER Logs in to the system with the specified user name. Yes
PASS Specifies the user password. Yes
ACCT Specifies charging information. No
CWD Uses the specified directory as the current directory. No
CDUP Uses the directory right above (master directory) as the current
directory. No
SMNT Mounts the specified external device as well as a file system in
other directory. No
QUIT Logs out. Yes
REIN Resets control connection. No
PORT Specifies the IP address and port number for data connection. Yes
PASV Instructs you to switch to the passive mode. No
TYPE Specifies the transfer data format. Yes
STRU Indicates the structure of the file to be transferred with an option. Yes
MODE Specifies the transfer mode. Yes
RETR Retrieves the contents of the specified file from the server. *