Xerox 490 - Manual (Page 98)

Printer Management Xerox 490/980 Color Continuous Feed Printing System
7-8 Printer & PC GUI Guide
Color Mode
Under the Color Mode tab, the color mode or monochrome mode can be selected. The setting
can be changed when the printer is in NOT READY status. The setting cannot be changed when
the job is being processed.
• Select either B/W or Color, and select [Setting] to set the print mode.
• In the monochrome mode, only the K toner color is used for the printing.
• If the monochrome mode is set for the printer while monochrome is not set at the Color tab
under Queue Management, a message appears at the start of the job to check if the job is
to be continued.
• If the color mode is set for the printer while monochrome is set at the queue management
color tab, no message appears.
• No modification is possible if there is any active job.