Yamaha HTR-6090 User Manual
Page 125
121
En
ADVANCED SETUP
AD
V
ANCED
OPE
R
A
T
IO
N
4
Press the numeric buttons to enter the four-
digit remote control code for the input area
you want to use.
Remote control tuner codes
Select one of the following codes to set the remote control
tuner code for the input area you want to use.
Remote control XM codes
Select one of the following codes to set the remote control
XM code for the input area you want to use.
You need to set the corresponding remote control tuner ID
or XM ID (see page 118).
5
Press ENTER to set the number.
“OK” appears in the display window if setting was
successful.
“NG” appears in the display window if the setting
was unsuccessful. In this case, start over from step 1.
6
Press LEARN again to exit from the setup
mode.
Tuner library
code
(remote control
setting)
Function
Remote
control
tuner ID
2602
(initial setting)
To operate this unit using the
default code.
ID1
(initial setting)
2603
To operate this unit using an
alternative code.
ID2
XM library
code
(remote control
setting)
Function
Remote
control XM
ID
2604
(initial setting)
To operate this unit using the
default code.
ID1
(initial setting)
2605
To operate this unit using an
alternative code.
ID2
Note
4
3
2
0
9
5
1
7
6
8
STEREO
SUR. DECODE
SELECT
EXTD SUR.
CLASSICAL
LIVE/CLUB
ENTERTAIN
MOVIE
ENTER
A-E/CAT.
PRESET/CH
LEARN
01EN_00_HTR-6090_U.book Page 121 Tuesday, June 27, 2006 6:40 PM