Yamaha HTR-6090 - Manual (Page 88)

84
En
CUSTOMIZING THIS UNIT (MANUAL SETUP)
Input menu 3 INPUT MENU
Use this menu to manually reassign the input/output jacks, select the input mode or rename the input source.
Option menu 4 OPTION MENU
Use this menu to manually adjust the optional system parameters.
■ Signal information
SIGNAL INFO
Use this feature to check audio signal information (see page 41).
Parameter Features Page
A)I/O ASSIGNMENT Assigns the input/output jacks of this unit according to the component to be used. 93
B)INPUT RENAME Changes the name of the input source. 94
C)VOLUME TRIM Adjusts the output volume of each jack. 95
D)DECODER MODE
Selects the input mode for the sources connected to the DIGITAL INPUT jacks on the rear
panel of this unit.
95
E)MULTI CH SET
Adjusts the direction of the signals input into the center, subwoofer, and surround channels
when a source component is connected to the MULTI CH INPUT jacks.
95
Parameter Features Page
A)DISPLAY SET Adjusts the brightness of the display and converts video signals. 96
B)MEMORY GUARD Locks sound field program parameters and other “SET MENU” settings. 98
C)AUDIO SELECT Initializes the parameters of a group of sound field programs. 98
D)DECODER MODE
Selects whether to initialize the settings or to recall the previous settings for the input mode
selected in INPUT MENU.
98
E)PARAM.INI Initializes the parameters of a group of sound field programs. 98
F)ZONE SET Adjusts the Zone 2 parameters. 99
G)XM RADIO SET Displays the current reception level of XM Passport System. 99
H)DOCK SET
Selects whether this unit charges the battery of the connected iPod or not when this unit is in
the standby mode.
99
Note
01EN_00_HTR-6090_U.book Page 84 Tuesday, June 27, 2006 6:40 PM